Wheel Modifications & Customisation Brisbane

Operating out of our Brisbane workshop, Dr Wheels specialise in quality wheel modifications and customisations in Brisbane. Available for both alloy wheels and steel wheels, our qualified engineering tradesmen are second-to-none when it comes to modifying and customising your vehicle’s wheels.

Our wheel modifications and customisations in Brisbane include:

  • Widening and narrowing
  • Change offset on Billet Wheels
  • Stud pattern changes/redrill
  • Machine the centrebore
  • Machine the back pad
  • Custom Made Hub Rings
  • 3 Piece wheel separation, reassembled, retention & reseal
  • Drill bolt holes in blank 3 Piece Wheel sections

Wheel Widening & Narrowing - Alloy & Steel

For alloy wheels, as part of wheel widening we cut the back section off your wheel, and fit and weld a wider back section from a donor wheel onto the front section of your wheel. Wheel narrowing involves cutting the back section off your wheel, cutting the required reduction out of the back section, and then fitting and welding it back onto the front section of your wheel.

For steel wheels, we can carry out wheel widening and narrowing by cutting the centre out of your wheel, buying a new outer barrel of the required size, and then welding your centre into the new barrel.  To obtain required offset, we can also reverse the centre and relocate your valve hole.

Before

After


Change the Stud Pattern 
- Alloy Wheels Only!

With our wheel modifications and customisations in Brisbane, we can undertake professional stud pattern changes on alloy wheels. We can either drill blank wheels, or redrill and insert to change the stud pattern. Please enquire about the particular change you require – some changes can be made, some can’t!

Machining the Centre Bore

To fit a bigger hub, we recommend machining the centre bore for quality wheel modifications and customisations in Brisbane. If your centre bore is too large for your hub, we fabricate custom hub rings to centre your wheel on your hub.


Machining the Back Pad 

To get your wheels under your guards, we can machine the back pad. Note – this will give you a more positive offset!  This can only be done if the back pad has enough ‘meat’ to machine off!

Find out more about wheel modifications and customisations in Brisbane and the greater region by contacting Dr Wheels. Call us on 0408 993 761, or email us at [email protected].